What temperature should I keep my house to prevent mold?
The ideal temperature is between 77 and 86 degrees Fahrenheit. During the summer months, temperatures are often higher than normal inside the home. Make an effort to keep temperatures inside the home lower during the summer months. Setting the thermostat to the low 70s makes it more difficult for mold to grow.
Mold Growth- The colder you keep your home, the colder the walls, ceiling, floors, windows and more will be. Water vapor that gets into these porous materials is the ideal place for mold to grow. This also can happen when humid outdoor air gets into the home and the indoor humidity is low in the air.
In general, mold spores require 50 to 60 degrees Fahrenheit (10 to 16 Celsius) for survival; however, the average low temperature in most homes is between 45 and 55 degrees Fahrenheit (7 to 13 C). As long as you don't let the indoor temperature reach freezing, it's unlikely that any mold will grow.
What Temperature and Humidity Does Mold Grow At? Mold grows fastest between 77°F and 86°F with relative humidity above 55%. It's worth noting that mold can survive at almost any temperature. Colder temperatures simply cause mold colonies to go dormant, which limits spore production.
You will get less mould if you keep your home warm, ventilate properly and minimise the amount of moisture you release into the air.
Leaving the AC off for long periods of time gives mold and bugs enough time to settle in the higher humidity. To prevent this, raise the temperature on your AC unit 7 to 10 degrees and leave it running while you're away.
It is possible to live in a home with mold if the moldy materials have been encapsulated as it prevents mold spores from becoming airborne. However, it is quite difficult to live in a house with mold if it is left unattended as it poses a significant risk to everyone.
If you have to stay in a moldy home, you need to take steps to reduce your exposure to mold. If you have asthma, COPD, or if you are immune-compromised you should not stay in a moldy home, or even be there while it is being cleaned. Spend less time in your home.
Reduce Mold and Mildew
A dehumidifier is designed to reduce the moisture level in the air by extracting the excess water. By doing so, dehumidifiers can help prevent the growth of mold and mildew and improves the indoor air quality of your space.
Hydrogen peroxide kills mold spore on contact by breaking down proteins and DNA. It's normally used to clean mold on porous and non-porous surfaces. Ionized hydrogen peroxide can kill mold spores in the air, but it requires the use of a special fogging machine.
What temperature kills all mold?
Most yeasts and molds are heat-sensitive and destroyed by heat treatments at temperatures of 140-160°F (60-71°C). Some molds make heat-resistant spores, however, and can survive heat treatments in pickled vegetable products.
The risk of mold growth in your home increases in summer months due to several factors like warmer temperatures and summer rains.
- Keep humidity levels in your home as low as you can—no higher than 50%–all day long. ...
- Be sure the air in your home flows freely. ...
- Fix any leaks in your home's roof, walls, or plumbing so mold does not have moisture to grow.
Extreme temperatures do not kill mold, but they can deactivate them. Even when temperatures drop below freezing, mold spores don't die; they simply become dormant and will begin to multiply and grow again as soon as the temperature rises.
Inactive mold is dry and powdery, and the surface layer can generally be readily brushed off the surface. Inactive mold can easily become active given the right environmental conditions. Mold can also cause staining of materials, which may be permanent even after the mold has been removed.
It is also very important that there is adequate ventilation in the room. Open a window or door so the mold spores can escape, instead of staying locked in your home.
Do air purifiers help with mold? Air purifiers help capture mold spores from the air, preventing them from reproducing and spreading throughout your home. While air purifiers won't help treat active mold that's already present on surfaces, they are a great way to control the spread of airborne mold particles.
Mold inside your house can make you certainly sick, breathing in mold fragments or spores can inflame the air passages, creating a nasal blockage, wheezing, breast tightness, coughing, and throat inflammation.
Do NOT use fans if mold may already exist; a fan will spread the mold spores. Try to keep the humidity in your home below 40 percent. In moisture-prone areas, eliminate carpets or choose carpets of man-made fibers. Insulate to reduce potential for condensation on cold surfaces.
Use “auto” mode.
Warm, moist, and stale air is the perfect environment for mold to grow. Instead, use the “auto” function on your air conditioning unit.
How do you tell if there is mold in your AC?
- A noticeable musty smell near the air vents in the indoor environment.
- The distinct odor increases when the air is running.
- Patches of black fungi re visible around the vents, evaporator coils, or drip pans.
How common is mold in buildings? Molds are very common in buildings and homes. Mold will grow in places with a lot of moisture, such as around leaks in roofs, windows, or pipes, or where there has been flooding. Mold grows well on paper products, cardboard, ceiling tiles, and wood products.
Black mold, as the name implies, is often dark in color. When searching for black mold, look for circular-shaped spots that are black, dark green or dark brown. Some black mold can also take on shades of orange or have flecks of white within it. Most of the time, black mold has a slightly furry appearance.
Symptoms of mold exposure may include headache, sore throat, runny nose, coughing, sneezing, watery eyes and fatigue. In those with asthma, asthma attacks can occur. In those with impaired immune systems, serious infection can occur.
DampRid Fragrance Free Hanging Moisture Absorber attracts and traps excess moisture from the air, eliminating musty odors and inhibiting mold and mildew. DampRid's crystals absorb excess moisture out of the air to create optimal humidity.